Cannon-instrument D155 Density Meter User Manual download pdf (Page 34)

4-12. How to connect the optional printer or a personal computer (PC)

The optional printer can be connected to the D155 unit so that the measurement and calibration results

together with the date and time of measurement can be printed out. Connect the supplied printer cable

to the RS-232C port (DB-9M) on the back of D155 unit as shown.

A personal computer (PC) can be connected instead of the printer so that data can be exported. A

data collection software package – SOFT-CAP Data Capture Software is available as an option with the

D155. Please consult the separate SOFT-CAP Operation Manual for more details on installation and

use.

Warning!

Use correct AC power adapter suitable for the AC

line voltage. Make

sure to use the proper rated voltage before plugging it into

the outlet.

Failure may damage the printer or even cause the adapter itself to catch

fire.

Note:

Do not place the printer on the top of the main unit in order to avoid the

influence magnetic field of the printer on the measuring cell.

The DIP switch on the Dot Matrix printer kit (P/N: 95.0239)

is configured

as shown below. When you have changed this switch configuration,

refer to the Instruction manual for the printer and set it as shown below:

Dip SW-1

OFF

CANNON

D155 Density Meter Instruction & Operation Manual

Version 1.1b – August 2014; CANNON® Instrument Company

2139 High Tech Road • State College, PA • 16803 • USA

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 50 51

No comments

Cannon-instrument D155 Density Meter User Manual Page 34